Shepperton +44 (0)1932 593 505

Cardiff          +44 (0)2921 304 110

Header Image


Wireless digital lens control (Focus, Iris and Zoom) with information display (speed, total meters or feet counter, last take meters or feet counter, signal coverage indicator, low battery indicator, camera status ON/OFF and zoom position scales

15 Communication chanels between 2.4GHz and 2.5GHz. Half Duplex Microwave between the hand unit and the motor driver box.

1 Channel of communication by cable using RS485

Input voltage in Motor Driver Box (MDB) from 11 to 30 V DC.

Standard 7.2 V NP-FM50 Sony batteries for hand unit

The lens is automatically calibrated when connecting the power cable to the digital motor from the Motor Driver Box (MDB) as well as from the Hand Unit set menu

The calibration remains saved on memory when disconnecting the equipment. This avoids any movement of the lens once the system is connected back, being very useful in situations like battery replacement

External small zoom control can be connected to the Motor Driver Box (MDB) or to the Hand Unit for external zoom control.

Two Hand Units can be connected wireless in mode “Master-Slave” to separate the Focus, Iris and Zoom control

Three power levels for the initial lens calibration and three levels for the motor movement (Low, Medium and High)

Set limits to Focus, Iris or Zoom movements.

Run camera control from the hand Unit

Brackets, gears, driver cables and power cables available for any camera and any lenses in the market

Share This Page

Tweet Email


Additional Info

  • Technical Specifications:


  • Header Image: Header Image